Teledex Y Series User Manual Page 27

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 26
Y SERIES EXP212, EXP224, AND EXP248 USER GUIDE www.teledex.com 27
Button Description
ACO For Alarm Cut Off service (EXP248)
RST An embedded hardware button for
hardware resetting (EXP248)
2.4 Replacing Units (EXP212,
EXP224)
This section provides procedures on how to
replace the air filter (replace every three months).
Procedure 2.1 Replace the Air Filter (EXP212,
EXP224)
NoteYou must loosen the connection of the
fan card to the DSLAM and pull out the Air Filter
before replacing the air filter.
1. Put on the anti-static wrist strap and
connect it to a grounding point.
2. Turn the screw on the Air Filter Panel
counterclockwise until it loosens the
connection of the panel to the DSLAM.
Remove the Air Filter Panel.
3. Pull the air filter out of the DSLAM.
4. Slide the replacement air filter into the
air filter slot of the DSLAM.
5. Reinstall the Air Filter Panel.
2.4 Replacing Units (EXP248)
This section provides procedures on how to:
• replacethefancard(replaceasrequired)
• replacetheairfilter(replaceeverythree
months)
Procedure 2.2 Replace the Fan Card (EXP248)
Danger—When removing the fan card, wait
for a moment for the fan blades to come to a
complete stop before fully extracting the fan
card.
1. Put on the anti-static wrist strap and
connect it to a grounding point.
2. Slide the power switch of the DSLAM to
the OFF position.
3. Remove the fan card to be replaced by
doing the following steps:
a. Turn the two screws on the faceplate
of the fan card counterclockwise until
they loosen the connection of the fan
card to the DSLAM.
b. Pull the fan card out about 2 inches
and wait for a moment for the fan
blades to stop completely.
c. Pull the fan card completely out of the
DSLAM, and set it aside.
4. Install the replacement fan card into the
DSLAM by doing he following steps:
a. Slide the replacement fan card into the
fan card slot of the DSLAM.
b. Turn the two screws on the faceplate
of the fan card clockwise until they
secure the fan card in place.
Air filter
Air filter
Fan card
Page view 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments