10 www.teledex.com YSERIESEXA100USERGUIDE
Chapter 5 Wireless Setting
5.1 Basic
You can configure the minimum number of
wireless settings for communication, such as
networkname(SSID)andchannel.
5.1.1 WIRELESS NETWORK
Field Description
Driver
Version
Displaystheversionofthedriver.
Radio On/
Off
Enableordisablethewireless
LAN.
Network
Mode
There are 5 modes: 11b only, 11g
only,11n only,11b/g mixed mode,
and 11b/g/n mixed mode.
Network
Name
(SSID)
The service set identification
(SSID)isauniquenameto
identify the router in the
wirelessLAN.Wirelessstations
associating to the router must
havethesameSSID.Inputa
descriptive name. Its length is up
to 32 characters.
Multiple
SSID
1/2/3/4
This router supports multiple
SSIDscalledGuestSSIDsor
Virtual Access Points.
Field Description
Broadcast
Network
Name
(SSID)
SelectEnabletoallowtheSSID
broadcast on the network, so that
theSTAcanfindit.Otherwise,
theSTAcannotfindit.
AP
Isolation
EnableordisableAPIsolation.
When many clients connect to
the same access point, they can
access each other. If you want
to disable the access between
clients which connect the same
access point, you can enable this
function.
MBSSID AP
Isolation
EnableordisableMBSSIDAP
Isolation.
BSSID BasicServiceSetIdentifier.This
is the assigned MAC address of
the station in the access point.
This unique identifier is in Hex
format and can only be edited
whenMultiBSSIDisenabledin
the previous screen.
Frequency
(Channel)
A channel is the radio frequency
used by the wireless device.
Channels available depend on
yourgeographicalarea.You
may have a choice of channels
(for your region) and you should
use a different channel from
an adjacent AP to reduce the
interference. The Interference
and degrading performance
occurs when radio signals from
different APs overlap.
Comments to this Manuals