Teledex Pearl User Manual download pdf (Page 2)

CARE AND MAINTENANCE

Your Pearl telephone has been designed to provide years of trouble

free service. To ensure its longevity, please follow these maintenance

instructions:

1) Keep the Pearl away from heat, as high temperatures can shorten

the life of the electrical components, and distort or melt plastic

parts.

2) The telephone should be kept free of dust and moisture. If it

gets wet, wipe it dry immediately. Liquids may contain minerals

that can corrode electronic circuits.

3) Handle your telephone gently and carefully. Dropping it can

cause serious damage to internal circuitry or the plastic case,

which may result in malfunction.

4) Do not use any type of chemical or abrasive powder to clean the

outer casing. Use only mild detergents on a soft, damp cloth to

clean the telephone.

5) In case of trouble with the telephone, do not attempt to repair

the telephone yourself. Contact your distributor for assistance.

If the trouble is affecting the telephone lines, the phone company

or service provider may ask you to disconnect the telephone

until the problem is resolved.

APPROVALS

The Pearl telephone has been approved to the following standards:

• iCTR37 and TBR38

• EN 60950: 2000

• EN 55022: 1998 Class B

• EN61000-4-2 1995 as required by EN 55024: 1998

• EN61000-4-3 1996 as required by EN 55024: 1998

• EN61000-4-4 1995 as required by EN 55024: 1998

• EN61000-4-5 1995 as required by EN 55024: 1998

• EN61000-4-6 1996 as required by EN 55024: 1998

• EN61000-4-8 1995 as required by EN 55024: 1998

IMPORTANT SAFETY INSTRUCTIONS

WHEN USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD

ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY

TO PERSONS, INCLUDING THE FOLLOWING:

1. READ AND UNDERSTAND ALL INSTRUCTIONS.

2. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE PRODUCT.

3. UNPLUG THE PRODUCT FROM THE WALL OUTLET BEFORE CLEANING. DO NOT USE

LIQUID CLEANER OR AEROSOL CLEANERS. USE A DAMP CLOTH FOR CLEANING.

4. DO NOT USE THIS PRODUCT NEAR WATER, FOR EXAMPLE: NEAR A BATHTUB, WASH

BOWL, KITCHEN SINK OR LAUNDRY TUB, IN A WET BASEMENT, OR NEAR A SWIMMING POOL.

5. DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND OR TABLE. THE PROD-

UCT MAY FALL, CAUSING SERIOUS DAMAGE TO THE PRODUCT.

6. SLOTS AND OPENINGS IN THE CABINET AND THE BACK OF BOTTOM ARE PROVIDED

FOR VENTILATION. THESE OPENINGS MUST NOT BE BLOCKED OR COVERED. THE

OPENINGS SHOULD NEVER BE BLOCKED BY PLACING THE PRODUCT ON A BED, SOFA,

RUG OR ANY OTHER SIMILAR SURFACE. THIS PRODUCT SHOULD NEVER BE PLACED

NEAR OR OVER A RADIATOR OR HEAT REGISTER. THIS PRODUCT SHOULD NOT BE

PLACED IN A BUILT-IN INSTALLATION UNLESS PROPER VENTILATION IS PROVIDED.

7. NEVER PUSH OBJECTS OF ANY KIND INTO THIS PRODUCT THROUGH CABINET SLOTS

AS THEY MAY TOUCH DANGEROUS VOLTAGE POINTS OR CAUSE A SHORT CIRCUIT THAT

COULD RESULT IN A FIRE OR ELECTRIC SHOCK. NEVER SPILL LIQUID OF ANY KIND ON

THE PRODUCT.

8. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT DISASSEMBLE THIS PRODUCT.

IF SERVICE IS NECESSARY, SEND OR TAKE THE TELEPHONE TO A QUALIFIED SERVICE

FACILITY. OPENING OR REMOVING COVERS MAY EXPOSE YOU TO DANGEROUS VOLT-

AGES OR OTHER RISKS. INCORRECT REASSEMBLY CAN CAUSE ELECTRIC SHOCK

WHEN THE APPLIANCE IS SUBSEQUENTLY USED.

9. UNPLUG THIS PRODUCT FROM THE WALL OUTLET AND REFER SERVICING TO QUALI-

FIED SERVICE PERSONNEL UNDER THE FOLLOWING CONDITIONS:

• IF THE POWER SUPPLY CORD OR PLUG IS DAMAGED OR FRAYED

• ID LIQUID HAS BEEN SPILLED INTO THE PRODUCT

• IF THE PRODUCT HAS BEEN EXPOSED TO RAIN OR WATER

• IF THE PRODUCT DOES NOT OPERATE NORMALLY BY FOLLOWING THE

OPERATING INSTRUCTIONS. ADJUST ONLY THOSE CONTROLS THAT ARE

COVERED BY THE OPERATING INSTRUCTIONS, AS IMPROPER ADJUSTMENT OF

OTHER CONTROLS MAY RESULT IN DAMAGE AND WILL OFTEN REQUIRE

EXTENSIVE WORK BY A QUALIFED TECHNICIAN TO RESTORE THE PRODUCT TO

NORMAL OPERATION.

• IF THE PRODUCT HAS BEEN DROPPED OR THE CABINET HAS BEEN DAMAGED.

• IF THE PRODUCT EXHIBITS A DISTINCT CHANGE IN PERFORMANCE.

10. AVOID USING THE TELEPHONE DURING AN ELECTRICAL STORM. THERE MAY BE A

REMOTE RISK OF ELECTRIC SHOCK FROM LIGHTNING.

11. DO NOT USE THE TELEPHONE TO REPORT A GAS LEAK IN THE VICINITY OF THE

LEAK.

IF YOUR PRODUCT USES BATTERIES, FOLLOW THESE ADDITIONAL PRECAUTIONS:

1. USE ONLY THE TYPE AND SIZE OF THE BATTERY SPECIFIED.

2. DO NOT DISPOSE OF BATTERIES IN A FIRE. THE BATTERIES CAN OR MAY EXPLODE.

CHECK LOCAL CODES FOR PROPER BATTERY DISPOSAL INSTRUCTIONS.

Wall

Mount

Clip

(under

handset)

Handset

Ringer Volume

Data Port

Line Jack

Handset Volume

Store Key (hidden)

Guest Service Keys

(programmable)

Dial Pad

Flash Key Redial Key Message Waiting Indicator

MAIN DIAGRAM

RIGHT VIEW

LEFT VIEW

WALL MOUNTING

Handset Volume

Handset Coil Cord

Handset Jack

Data Port

Cord Channel

Wall Jack

Teledex, LLC

6311 San Ignacio Avenue

San Jose, CA 95119

USA

Telephone: 01.408.363.3100

Fax: 01.408.363.3136

email: [email protected]

Internet: www.teledex.com

Part Number: 600-0480-62

FOR CUSTOMER SERVICE CALL

01.405.363.3100

1.800.451.4035 (North America)

Telephone: 1.800.451.4035

(North America)

+1.719.638.8821

Address: Cetis, Inc.

5025 Galley Road

Colorado Springs, CO 80915

Internet: www.teledex.com

Email: [email protected]m

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Teledex Pearl User Manual Page 2

Comments to this Manuals

Related products and manuals for Phones Teledex Pearl