YSERIESEXA100USERGUIDE www.teledex.com 13
5.3.1 SELECT SSID
SSID Choice: SelectSSIDfromthedrop-downlist.
5.3.2 “DEFAULT”
Security Mode: There are 11 options, including
Disable, OPEN, SHARED, WEPAUTO, WPA, WPA-
PSK, WPA2, WPA2-PSK, WPAPSKWPA2PSK,
WPA1WPA2, and 802.1X.
5.3.3 [EXAMPLE]
Take Open WEP forexample. Select Open WEP
from the Security Mode drop down-list. The
following page will be displayed.
5.3.4 CETIS AP
Security Mode: There are 11 options, including
Disable, OPEN, SHARED, WEPAUTO, WPA, WPA-
PSK, WPA2, WPA2-PSK, WPAPSKWPA2PSK,
WPA1WPA2, and 802.1X.
5.3.5 WIRE EQUIVALENCE PROTECTION
(WEP)
WEP Key (1-4): Input the key to encrypt wireless
data. To allow encrypted data transmission,
the WEP Encryption Key values on all wireless
stations must be the same as the router. There
are four keys for your selection. The input format
caneitherbeHEXstyleorASCIIformat,10and26
HEXcodesor5and13ASCIIcodesarerequired
forWEP64andWEP128respectively.
5.3.6 ACCESS POLICY
Policy: Therearethreeoptions,includingDisable,
Allow,andReject.YoucanchooseDisable,Allow,
or Reject. Select Allow, only the clients whose
MAC address is listed can access the router.
SelectReject,theclientswhoseMACaddressis
listed are denied to access the router.
Add a Station MAC: If you want to add a station
MAC, input the MAC address of the wireless
stations that are allowed or denied access to your
router in this address field.
After completing the settings above, click Apply to
save the settings and make the new configuration
take effect. Click Cancel to close without saving.
5.4 WDS
5.4.1 WIRELESS DISTRIBUTION SYSTEM
(WDS)
WDS Mode: There are four options, including
Disable, Lazy Mode, Bridge Mode, and Repeater
Mode.
• Disable
SelectDisabletodisabletheWDSmode.
• Lazy Mode
Comments to this Manuals