YSERIESEXP100USERGUIDE www.teledex.com 7
Chapter 3 Web User Interface
This section describes how to access the device
viatheWebUserInterface(WUI)usinganInternet
browser such as Internet Explorer (version 5.0
and later).
3.1 Default Settings
The factory default settings of this device are
summarized below.
• LANIPaddress:DHCP(nofixeddefaultaddress)
• DHCPIPAddressisdiscoverableviayour
DHCPClientLogsorviatheAdminServer
• Administrativeaccess(username:root,
password: 12345)
• Useraccess(username:user, password:
user)
• Remote(WAN)access(username:support,
password: support)
3.1.1 TECHNICAL NOTE
During power on, the device initializes all
settings to *default values. It will then read the
configuration profile from the permanent storage
section of flash memory. The default attributes
are overwritten when identical attributes with
different values are configured. The configuration
profile in permanent storage can be created via
the web user interface or telnet user interface,
or other management protocols. The factory
default configuration can be restored either
by pushing the reset button for more than five
seconds until the power indicates LED blinking
or by clicking the Restore Default Configuration
option in the Restore Settings screen.
*ForParameterRulesinbackupsettings,please
seeAppendixC—ParameterRules.
3.2 IP Configuration
3.2.1 STATIC IP MODE
InstaticIPmode,youassignIPsettingstoyour
PCmanually.
Follow these steps to configure your PC IP
addresstousesubnet192.168.2.x.
NOTE: The following procedure assumes you are
runningWindowsXP.However,thegeneralsteps
involved are similar for most operating systems
(OS). Check your OS support documentation for
further details.
STEP 1: From the Network Connections
window, open Local Area Connection.
(You may also access this screen
by double-clicking the Local Area
Connection icon on your taskbar.) Click
the Properties button.
STEP 2: SelectInternetProtocol(TCP/IP) and
click thePropertiesbutton.
STEP 3: Change the IP address to the
192.168.2.x (1<x<255) subnet with
subnet mask of 255.255.255.0. The
screen should now display as shown
below.
STEP 4: Click OK to submit these settings.
Comments to this Manuals